产品列表PRODUCTS LIST

SZ-93
点击次数:1301 更新时间:2016-03-28

GLASS WATER DISTILLER

MODEL SZ-93

1.      FILL-VIA-GRAPH

2.      COOLING PIPE

3.      TEMPERATURE CONTROLLER

4.      OUTLET OF FIRST DISTILLATION WATER ENTERING INTO

5.      OUTLET OF COOLING WATER CONNECTING TO THE FILL-VIA-GRAPH WITH PIPE

6.      OUTLET OF COOLING WATER CONNECTING TO THE FIRST DISTILLATION BOTTLE

7.      INLET JOINT OF COOLING WATER

8.      OUTLET OF SECOND DISTILLING WATER CORREOTING BOTTLE

9.      INJECTING A

10.   INSERT INTO B

11.   QUARTZ HEATING BREAKER

12.   OUTLET OF REMAINING WATER

13.   SPRING FILL-VIA-GRAPH

14.   SPRING MAGNET FLOAT PIPE MAGA-ZING IRON

15.   GLASS PIPE

16.   DURING OPERATION ACCORDING TO THE POSITION OF THIS DIAGRAM AND ADJUSTING THE HEIGHT OF SPRING AND THIS HIGHT SHOULD BE BROKEN THE POWER AUTOMATIOLLY THUS CONTROL THE WATER LEVEL

GLASS WATER DISTILLER

MODEL SZ-93

 

APPLICATON INTRODCTION

1.    This apparatus is used for dual distilled water in the laboratory.

2.    The water purity distilled by the apparatus is HEATING BY QUARTZ TUBE higher than the purity at general distillatory.

3.    The first and second distillation by this apparatus are protected by relay. Safety and reliability. When at the first distillation, the first distillery starts. Then the distilled water flow into the second distillery, after the water reaches certain level. The wire spring relay connects power, and the second distillery starts to distill.

4.    The wire-spring relay controls the water level in the second distilling bottle.

5.    The Temperature relay controls the water temperature in the first distilling bottle. Cooling pipe temperature 60,Broken the power.3-5 min spring the power automatically.

6.    These two relays control two quartz heating tubes respectively.

TECHNICAL DATE

Quantity of pure-water: 1600ml/hour

Input volt-age:220v/50Hz

Input power:3kw

DIMENSIONS:

Dimension:65×58×35cm(Length×Width×Height)

Weighs:14kg